**Circular pieces**

This table assumes that a 150 mm diameter pot is being used, and assumes that 125 grams of glass will be left in the pot. Larger diameter pots or even pot trays can be used, but more glass will remain in the container. The following table gives the desired diameter of the melt and the weight of glass needed to achieve an average 6 mm thick result. To achieve a uniform six millimetre thick disk will require long soaks at both melting and fusing temperatures to allow the glass to even out in thickness.

50 mm diameter disk requires 154 grams of glass

100 mm diameter disk requires 243 grams of glass

150 mm diameter disk requires 390 grams of glass

200 mm diameter disk requires 596 grams of glass

250 mm diameter disk requires 861 grams of glass

300 mm diameter disk requires 1185 grams of glass

350 mm diameter disk requires 1568 grams of glass

400 mm diameter disk requires 2015 grams of glass

**Thicker melts**

Of course if you want a thicker pot melt — one that is confined so that it cannot grow larger, only thicker — you can use the following method to estimate the amount of glass required.

Choose the diameter wanted from the above table, and subtract 125 from the weight of glass required. Then multiply by thickness wanted divided by 6 mm. Add back 125 gms — the amount that will be retained in the pot — and you have the required amount.

For example: a 200 mm disk of 6 mm requires 596 gms. You want a 12 mm thick disk of 200 mm.

First subtract 125 from 596 to get 471 gms. 417 gms times 12 equals 5652. Divide this by 6 mm and you have 942 gms required. Add 125 gms — the amount left in the pot — and you have a requirement of 1067 gms for a 12 mm thick disk of 200 mm.

**Rectangular pieces**

These are easier to calculate than discs, as the calculation is length times height times depth (all measurements in centimetres).

If you are making a billet and using an empty margarine pot of 7 cm wide, 12 cm long and 7 cm high you will need enough glass to fill a volume of 588 cubic centimetres. As the specific gravity of glass is 2.5, you multiply the cubic centimetres to give the weight required in grams — in this case, 1470 gms.

If you wanted a 6 mm tile of 100 mm square you would need 150 grams of glass.

To make a 1 cm slab of the same size you need 250 grams of glass.

To make a billet of 5 cm by 10 cm square you need 1250 grams of glass (this is pretty close the the maximum that can be loaded in a 12 cm diameter Pot).

To make a small sample billet of 2 cm thick by 4 cm by 8 cm you need 160 grams of glass.

A billet or pattern bar of 5 cm by 10 cm by 5 cm needs 625 grams of glass.